Wednesday, September 29, 2010

[MW:7272] RE: 7267] difference between E7018 and E7018-1

7018-1 has better impact properties compared to 7018. IN general 7018
electrodes should pass through CVN at -29 degrees with min 27J whereas
7018-1 the CVN values are tested at -46 degrees and min 27J

-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Adi
Sent: Wednesday, September 29, 2010 5:21 PM
To: Materials & Welding
Subject: [MW:7267] difference between E7018 and E7018-1

Hi everybody

What is difference between E7018 and E7018-1
what is meant by "-1"

Adi

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and
meant for educational purposes only, Users must take their own decisions
w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...