If a Air Receiver need to be painted depends completely on the
customers requirements. For example Shell mostly requires 300-350 µm
epoxy coating at the inside in order to prevent any corrosion caused
by high air humidity, especially if such air receiver is in front of a
expensive compressor.
To ensure that this coating doesn't come off Shell requires a special
pull off test for each serial coating system / material combination.
I'm not sure but I think that all these requirements are laid down in
Shell DEP 31.40.30.32.gen. This specification also specify the
requirements for surface preparation in order to ensure proper
adhesion.
Best Regards,
Herman Pieper
On 6 mei, 12:56, Fereidoun Majdnia <fmajd...@technip.com> wrote:
> Dear Pankaj
> Air Receivers are not normally painted or coated internally for two main
> reasons:
> 1- Air is not corrosive even in harsh environment and the moist accumulated
> in humid areas is drained periodically not to build up inside the vessel.
> 2- If internally coated the coat may get pilled off and carried into
> instrument and cause their malfunction.
>
> Regards
>
> pankaj abhang
> <pankaj.abhang1@g
> mail.com> To
> Sent by: materials-welding@googlegroups.com
> materials-welding cc
> @googlegroups.com
> Subject
> [MW:5079] corrosion resistant
> 05/05/2010 03:03 plating
> PM
>
> Please respond to
> materials-welding
> @googlegroups.com
>
> Dear all
> I am having a vessel of CS i want to give corrosion resistant coating from
> inside any body will tell me the procedure such as paint, powder,or by
> electro plating method.The vessel is of Air reciver vessel constructed as
> per ASME. The coating to be done from inside to avoid corrosion.
>
> The size of vessel is Dia-1100, Length-2400 mm.
> MOC- SA516 GR. 70
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding-unsubscribe@googlegroups.com
> For more options, visit this group's bolg athttp://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
> Save a tree...please don't print this e-mail unless you really need to.
>
> Save a tree...please don't print this e-mail unless you really need to.
>
> This email and any attached files ("Message") may contain confidential and/or privileged information. It is intended solely for the addressee(s). If you receive this Message in error, inform the sender by reply email, delete the Message and destroy any printed copy.
> Any unauthorized use, distribution, or copying of this Message or any part thereof is prohibited. Emails are susceptible to alteration. Neither Technip nor any of its affiliates shall be liable for the Message if altered or falsified nor shall they be liable for any damage caused by any virus that might be transmitted with this Message.
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
> For more options, visit this group's bolg athttp://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Comments