Try ASME Sec. IIA SA-370
Thanks & Regards
J.Gerald Jayakumar
0091-8838619635
On Thursday 29 August, 2024 at 12:38:55 pm IST, Binto George <bintogeorgev@gmail.com> wrote:
Dear Experts?
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/f710ebaa-6272-48a0-a50f-969b22b0c818n%40googlegroups.com.
We obtained a value of 26J(avg) for P1 G2 material during procedure qualification with impact requirements, whereas the acceptance criteria according to API 9.2.2.5 is 27J(Avg). We used a subsize specimen of 7.5 x 10 mm. Is there any relaxation or allowance for subsize specimens in this context? If so, where can I find this information?
Regards,
Binto George
-- https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/f710ebaa-6272-48a0-a50f-969b22b0c818n%40googlegroups.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1427709181.702666.1724926231074%40mail.yahoo.com.
No comments:
Post a Comment