Re: [MW:35272] in socket weld gap should be 1.5mm to 3mm and radiography should be 10% is it mention in b31.3 or not?

Dear,

Minimum gap for socket welds as per B31.3 figure 328.5.2B & 328.5.2C is 1.5 mm

But the requirement of radiography is not mentioned in 31.3. But generally 10% radiography from the client specification is required to demonstrate that you have maintained a minimum gap of 1.5 mm as specified in 31.3

So please double check your client's requirements regarding socket welds.
Hope you clear it..

I welcome the opinion of other seniors

On Thu, Sep 12, 2024 at 5:40 PM Mohd Yasoob Azeem <yasoobazeem786@gmail.com> wrote:

Dear friend,

Greeting!

in socket weld gap should be 1.5mm to 3mm and radiography should be 10% is it mention in b31.3 or not?

Is this thing mentioned in ASME B31.3 or not?

I shall be very thankful for this kindness.

-- 

"Thanks & regards"

Mohd Yasoob Azeem

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/9ba85e7e-9f73-49db-939d-345bea3bc75dn%40googlegroups.com.

--

Thanks & Regards,

 

Srinivasrao.Gundala,

Please consider your environmental responsibility: before printing this e-mail, ask yourself whether you need a hard copy!

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CACn7QWVz2xQahmYy6pmK1kn-xT2YDoMyaLyydqa1z_B_-p6DXw%40mail.gmail.com.