Re: [MW:32297] Re: Back Weld at Pressure vessel - U stamp

And if it is a container that will have an ASME Stamp with a U Designator, why don't you ask your Authorized Inspector what is assigned to you?

El lun, 19 abr 2021 a las 7:35, Ramesh (<rameshkannandevaraj@gmail.com>) escribió:

Don't not confuse with production weld and repair welds

 

Though its single sided weld as per WPS for your production ,  when repair comes at root what you do ? ( presuming accessible at root side )

 

For repair, your weld metal is backing material, so any welder qualified with backing or without backing can repair in your case. 

Thanks and Regards

Rameshkannan D

"What you have learned is a mere handful; What you haven't learned is the size of the world – Avvaiyar"

On Mon, Apr 19, 2021 at 5:31 PM Vishwas Keskar <vvkeskar123@gmail.com> wrote:

Dear Samkar

May I know what is your concern now ?

On Mon, Apr 19, 2021 at 3:51 PM sankar bombay <sankar.bombay@gmail.com> wrote:

For GTAW Welder QW-402.4 Deleting of backing is essential Variable 

Addition of backing they have not mention 

On Mon, Apr 19, 2021 at 2:19 PM Ramesh <rameshkannandevaraj@gmail.com> wrote:

Seems weld repair carried out at the root side. Whether your repair carried out as per approved repair procedure ? 

 

With Backing or without backing is essential for welders, not for procedures !

unless there are any specific requirements from the client / inaccessible area for root welding.

Thanks and Regards

Rameshkannan D

"What you have learned is a mere handful; What you haven't learned is the size of the world – Avvaiyar"

On Mon, Apr 19, 2021 at 1:09 PM Vishwas Keskar Welding Manager WELDING <vvkeskar123@gmail.com> wrote:

Is  that WPS  addressing - 

 QW 402  - Joint design - GTAW - Backing - With/Without 

(Ref - QW256- GTAW - QW 402.5- Addition of  backing is Non essential variable.)

if Both (Backing - With/Without  )  is addressed( which  like  normally is  addressed), then there is no issue at  all .

Eg-

QW 402-

Backing: With/Without                                                                         

Root spacing: As per piping fabrication drawing                                                                                                          

Backing Material (Type): Yes (Metal)

1. Metal -        2. Non-fusing Metal      

3.   Nonmetallic NA   4. Others 

The matter is to  be resolved  amicably . Meet QAC  In charge along with Welding Engineer, Manufacturing Responsible. Explain him the details . 

It shall be acceptable.

Regards

On Monday, April 19, 2021 at 7:20:46 AM UTC+4 sankar krishnan wrote:

Dear Gentlemen,

   Good Evening, In our project Vessel joint thickness 10mm ,Process(GTAW+SAW),Single V joint 

They completed Welding ,Few days later during Inspection we observed , They have done Internal Welding of the shell, As per WPS its not shown 

Guys let me Know  its can Accepted or Rejected 

If Rejected , Please send Reference code standards

As per QW 402.5 Joints (Backing its non Essential ),Its mention Backing strip or also back welding 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/960d2caa-6684-4216-b79d-6eb48095898cn%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMaSVcGxuHhMRmyXeJobuwT02Mx8KudViGRskgQuiJNRr6ED%3Dw%40mail.gmail.com.

--

shankar

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAAyDEeYx%2Bjddw7_cQ_J1A7u3Op1N-pk9t%2BcAh7LDxXym8AAA0g%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADder3McUQS%2B%3DqRQppxd1B0SUSi9_P3ycAaUPyMU%2B8E93FpRAA%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMaSVcH%3DqrTAWpycfZ7nUjMYNX7%2B0MwFcBzzNNUXUXVx4KEkvQ%40mail.gmail.com.

--

Ing. José Juan Jiménez Alejandro

Independent Consultant in Parts

and Pressure Equipment

SUMMIT MÉXICO - TPI

https://www.linkedin.com/in/summit-m%C3%A9xico-tpi-760047137/

Móvil +52 1 812 352 4606

Skype: jjjimeneza

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAO5ZurJCvhZMmHYDumsis3dP66CwEk_UjS%3DBy242shqFaLh_6A%40mail.gmail.com.