Sunday, April 18, 2021

[MW:32273] Re: Tube welding design

Single Vee
Full GTAW process  


On Thursday, April 15, 2021 at 5:57:18 PM UTC+4 Emad wrote:
Dear all,
Tube A210 welding with GTAW or SMAW with thickness 5.5mm, obviously no access to the inside of the pipe. 
What is your suggestion? square butt or single v?

Thanks,

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/abf36ede-d394-473a-9ee4-8f47c7555cden%40googlegroups.com.

No comments:

[MW:35614] Re: SS FILLER

dear , pl check A number and Gas composition use for ss cant be sutibale same % for duplex., u need to qualified with aditional testing of f...