Materials & Welding: Re: [MW:32267] welding api 5l x52 with x60

Friday, April 16, 2021

Re: [MW:32267] welding api 5l x52 with x60

Its mean im in safe area to weld x52 with a694 f60 with thé same WPS

Électrode 6010 with 7018 or er70-s6 with 7018

Le ven. 16 avr. 2021 à 04:18, 'james gerald' via Materials & Welding <materials-welding@googlegroups.com> a écrit :

It is a normal practice in Pipeline to use low tensile electrode for the Root and hence you can use the WPS for welding X52 to A694 F60 as the requirement is the minimum Tensile strength as below. Check the PQR that 95% of UTS 67ksi (X52) is achieved.

For Piping, no issue.

Thanks & Regards
J.Gerald Jayakumar

On Thursday, 15 April, 2021, 03:27:13 pm IST, Adnan Ziad <adnanziad49@gmail.com> wrote:

for piprlinre 6010 for root and 7018 fil an cap
for piping gtaw er70-s6 + smaw 7018 fil and cap

Le jeu. 15 avr. 2021 à 10:37, Ramesh <rameshkannandevaraj@gmail.com> a écrit :
May I know what was the consumable used in your X52 WPS ?
Thanks and Regards
Rameshkannan D
"What you have learned is a mere handful; What you haven't learned is the size of the world – Avvaiyar"

On Thu, Apr 15, 2021 at 2:49 PM Adnan Ziad <adnanziad49@gmail.com> wrote:
in my case i have also a wps for piping api 5lx52 to a105 - can i use it to weld it with a694 f 60

Le jeu. 15 avr. 2021 à 10:03, Ramesh <rameshkannandevaraj@gmail.com> a écrit :
Sample

Thanks and Regards
Rameshkannan D
"What you have learned is a mere handful; What you haven't learned is the size of the world – Avvaiyar"

On Thu, Apr 15, 2021 at 2:20 PM Ramesh <rameshkannandevaraj@gmail.com> wrote:

As per API 1104 , 2013 edn, Clause 5.4.2.2 , you can use the same WPS without requalification. I presume your flange and fittings are having same SMYS ( Specified Minimum Yield Strength) and similar CEq

Requalification is required only when the base metal welding involves less than X42 or greater than X65. In your case this is not applicable.

Make sure, Your WPS have mentioned : Qualified Base material X42 Through X60.

Keeping future qualification purpose, it's better to qualify PQR with X65 material which many customers accept for all lower grades' base metal qualification.

Thanks and Regards
Rameshkannan D
"What you have learned is a mere handful; What you haven't learned is the size of the world – Avvaiyar"

On Thu, Apr 15, 2021 at 1:08 PM QA/QC <adnanziad49@gmail.com> wrote:
Dear master
i have a approved wps for welding api 5l x52 pipeline and i want to weld a anchor flange x60 is the wps cover it or we should requlaify it again

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/c82adcc6-aec4-4acc-9815-966de7fd1a23n%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMaSVcH5UFPQ0a3D0hOGCttar2sHnd5Mu%2Bf8TbA3wX%3DytQ89xw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CACbfGKf721ygyH03f_PBSpsbeaghjR0grKtccgZgjJTeWz5DBw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMaSVcGj5fN8OR_9BU0V9cCpiE6hHbPu6gF7keppe7GkrTa0rg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CACbfGKcV--J2-OV%2B7oXAVY%3Drhzq%2BChcVbG9j%3DkiJxZ825GBjFw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/79455236.1203584.1618495494208%40mail.yahoo.com.