Dear All,
I need complete detail or reports for successful cladding welding..
What are the quality controls usually applied for a cladding welding / pipe weld joint?
What are the possible problems that may occur during the welding of cladding?
The question raised based on avoiding even Single weld defects?
Special technique / Application
Sour Service & non Sour service.
Base material - A333 Gr 6 + UNS N06625, API 5L Gr B + UNS N06625, API 5L X52 PSL2 SMLS + UNS N08825
Pipe Size Range- 1. 0.5" to 8" Thickness -2.77 mm to 6.02 mm
2. 0.5" to 4" Thickness -3.73 mm to 8.56 mm
3. 6" & Above Thickness -10.97 mm to 30.18 mm
Application/ Process – GTAW + SMAW
Joint Type –Butt, Branch Conn, Fillet, Socket
Alloy Type -625 / 825
Clad/overlay – 3 to 5 mm
With PWHT / with PWHT
Applicable Code- ASME 31.3, Sec IX, SAES-0W-11
Thank you & thank you very much.
Pl specify base material , thickness , application , design parameters , environment ....--On Wed, 21 Apr 2021 at 08:23, PK M <pkmqaqc@gmail.com> wrote:--Dear All,
I need complete detail or reports for successful cladding welding ..
What are the quality controls usually applied for a cladding welding / pipe weld joint?
What are the possible problems that may occur during the welding of cladding?
The question raised based on avoiding even Single weld defects?
Thank you & Thank you very much.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFoQ_ncTF2Q%2Bt%2B6PKc1Pq6zpELvzNj%3DsMARhQpOvQSGjnxQUhQ%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CA%2BQ29OjGAzTdpGELp5Axt%2BCXu-qhXV%2Bb75DQgMLq245nAKx-gA%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFoQ_neeJsFv2iLO5MCTZwhps0H2SN%3D8BOzHw7nxf_xUwZDm3A%40mail.gmail.com.
No comments:
Post a Comment