Thursday, April 15, 2021

Re: [MW:32264] Tube welding design

GTAW
Single V..

Regards

Prem Nautiyal 


On Thu, 15 Apr 2021, 19:27 EmaD FaRaHanI, <emad.farahani@gmail.com> wrote:
Dear all,
Tube A210 welding with GTAW or SMAW with thickness 5.5mm, obviously no access to the inside of the pipe. 
What is your suggestion? square butt or single v?

Thanks,

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABtwbJFa2e_1dMQ3hiriryK7YYe5iuZQgP3S6UxVhugKEfL16w%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAEP2HKBjA8OBd887zBH_OJKYW7CoD3VJjA9QrXv5LgNzVPA_Qg%40mail.gmail.com.

No comments:

[MW:35504] Re: Clarification on SS304 Pipe EFW and RF Pad Weld Alignment per ASME Standards

Dear Experts, I am following up on my earlier emails regarding the alignment of weld seams on SS304 pipes and their reinforcing pads (RF p...