Re: [MW:29293] Hydro test pressure gauage range

Acc. To which reg.?

Sent from my iPhone

On 17-Mar-2019, at 4:00 PM, pradip kumar Sil <pradipsil@gmail.com> wrote:

Yes

On 17 Mar 2019 2:46 pm, "Mithlesh" <mithleshmech47@gmail.com> wrote:

Hii

My hydro pressure required is 61kg/cm2 and i used dial range 0-120kg/cm2 is it acceptable as per IBR?.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.