[MW:29174] Moderator's spam report for materials-welding@googlegroups.com

This message is being sent to you because you are a moderator of the group materials-welding.

The following suspicious messages were sent to your group, but are being held in your moderation queue because they are classified as likely spam messages.

If you take no action, all the messages below will be discarded automatically as spam.

However, if you see any messages that are not spam below, you may approve them individually by going to:

http://groups.google.com/group/materials-welding/pendmsg

Please do not mark this notification as spam; this is a service for group moderators. If you do not wish to receive these notifications in the future, you may change your preferences by going to:

http://groups.google.com/group/materials-welding/manage_post


------- 1 of 1 -------
Subject: Re: Re: [MW:29161] RE: 28982] Backing gas as per API RP 582
From: Ramin Kondori <raminkondori@gmail.com>
Date: Feb 28 12:48AM +0330

*Dear All:*

Below you can find a screen shot from SLV Duisburg publication:
*"Guidelines on the Welded Fabrication of Stainless Steels"*

SLV publications are among the most reliable references in welding
engineering
and here, it clearly

Approve: http://groups.google.com/group/materials-welding/pendmsg?view=full&pending_id=8359736312750959402


For more information about this message, please visit:
https://support.google.com/groups/answer/2466386