Re: [MW:27942] ISO 15614 -1 (base metal and weld metal Qualification thickness)

Hi Selas,

latest revision of ISO 15614-1 [2017] is current.

as per this Table 7, you may refer.

Thickness range of base material qualified is  7.5 - 30 mm when test weld plate is of 15 mm thick.

with 3rd row of table 7, it is clear the range of thickness is 7.5 to 30 mm only.

Regards,

MANIVANNAN.P

On Wed, Jun 6, 2018 at 10:50 AM, sela <mechselastine@gmail.com> wrote:

Dear experts

As per ISO 15614  ... Table 5

PQR plate thickness is 15 mm

Case 1:

For GTAW, deposited thickness is 5 mm .     So qualified range is from to 10 mm (multi-run).

For GMAW, deposited thickness is 10 mm .   So qualified range is from 3 to 20 mm (multi-run).

For thickness of base metal, acc. to ISO 15614-1, table 5 is 3 to 30mm. weldmetal qualified thickness also 3 to 30 mm

Case 2:

For GTAW, deposited thickness is 5 mm .     

For GMAW, deposited thickness is 10 mm.   

For thickness of base metal, acc. to ISO 15614-1, table 5 is 7.5 to 30mm

Please answer which case is correct case1 or case 2??

Please give explanation?

Regards 

Selas

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.