Re: [MW:27959] Valve Leak test

We are following Api 598 and vendor data sheet

Regards, 

Nishanth km

On Tue 12 Jun, 2018, 3:41 PM Kristian Lund Jepsen, <KUJ@ramboll.com> wrote:

On/off valves: ISO 5208 – you have to define leakage rate classes, A, B, C, D, etc.

Control valves: ANSI FCI 70-2 – you have to define leakage classses I, II, III, IV, etc.

 

 

Yours sincerely

Kristian Lund Jepsen

 

M. Sc. Mech. Eng.

Senior Chief Consultant

Piping, Mechanical and Layout

 

D +45 51617324

M +45  23402936

KUJ@ramboll.com

________________________________________

 

Ramboll

Bavnehojvej 5
DK-6700 Esbjerg
Denmark

www.ramboll.com/energy

 

DK REG. NO. 35128417

 

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of krishna kamal nayan Pandey
Sent: 11. juni 2018 16:01
To: materials-welding@googlegroups.com
Subject: [MW:27952] Valve Leak test

 

Gents,

 

Can anyone send me  Spec/ Procedure for valve leak test?

 

Best Regards,

 

Krishana Kamal Nayan

 

 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.