It depends upon what kind of valve you are interested in , what is the design code preferably, ..
Apart from ASTM, API, there are Indian standards as well.
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of krishna kamal nayan Pandey
Sent: Monday, June 11, 2018 7:31 PM
To: materials-welding@googlegroups.com
Subject: [SOCIAL NETWORK] [MW:27952] Valve Leak test
Gents,
Can anyone send me Spec/ Procedure for valve leak test?
Best Regards,
Krishana Kamal Nayan
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
----------------------------------------------------------------------------------------------------------
Information transmitted by this E-MAIL is intended only for the use of the addressee(s) and contains information that is privileged, confidential or exempt from disclosure under applicable law. If you are not the intended recipient or it appears that this mail has been forwarded to you without proper authority, you are notified that any use or dissemination and or copying of this email in any manner is strictly prohibited and you are requested to delete this e-mail immediately.
Communicating through e-mail is not secure and capable of interception and delays. Any one communicating with TATA Consulting Engineers Ltd., and / or its subsidiaries or associates or group companies by e-mail accepts the risks involved and their consequences.
While this e-mail has been checked for all known viruses, the addressee should also scan for viruses and notify the originator of e-mail.
---------------------------------------------------------------------------------------------------------
No comments:
Post a Comment