Saturday, April 28, 2018

Re: [MW:27753] Pressure Gauge range Selection for Hydro test

Dear Mr Mohan, 

Refer Sec VIII DIV 1 UG-102 Test Gage.


Best Regards,
Jay Poojary


On Sat, Apr 28, 2018, 9:17 AM Mohan <ggnanamalli@gmail.com> wrote:
Dear Experts,

Where in the code book does it state that the Hydrostatic Gauge should be between 1.5-4 times for  hydrostatic test pressure?

Regards
G.Mohanraj

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:35668] Selection of Filler/Electrode.

Dear Gentlemen, Kindly advise me as we have tube to tubesheet joint. Tube moc is incoloy 800 And tubesheet moc is F53 SDSS (Super duplex sta...