Re: [MW:27686] Percentage of RT As Per ASME B31.3

Hi Mukul,

It's a project requirement, ASME B31.3 will indicates the fluid service categories.

Percentage of radiography is normally mentioned in the NDT requirements of Client/Welding and NDT Specification.

Also, you can refer project (PMS) Piping material specification / Piping line list / Isometric Drawing.

The requirements are mentioned in the approved line list is the final and follow the same.

Thanks

On Apr 11, 2018 13:53, "Mukul" <mukulhossen70@gmail.com> wrote:

Dear Experts,

Can anybody help me by telling the RT percentage in ASME B31.3 ? Is the percentage is mentioned in the code or not ?

Regards,

Mukul Samad

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.