yes
THANKS & BEST REGARDS,
KG.PANDITHAN, BE, IWE, AWS-CWI, CSWIP 3.1,
CONSULTANT-WELDING & QUALITY
Mobile no: +919940739349
On Mon, Apr 16, 2018 at 7:16 PM, Vanchinath S.A. <vanchinaths@gmail.com> wrote:
You have to qualify WPS with impact test at mdmt.--On Mon, 16 Apr 2018, 19:10 gigi, <anhtrangnghieng@gmail.com> wrote:--Dear Experts,
Please help me to clarify issue as below:
Solid rod ER70S-G have been used for weld joints of HP Flare KO Drum by using WPS V02 (GTAW/SMAW – Impact test is not applied). Certificate of welding consumable ER70S-G indicates that impact test temperature is –30°C. Minimum design metal temperature (MDMT) of HP Flare KO Drum is –45°C. Material of HP Flare KO Drum is SA-516 Gr60 normalized.
In accordance with para.UCS-67(a)(3) ASME BPVC.VIII.1-2017 , is it a requirement to perform impact test at –45°C for welding consumable ER70S-G?
Thanks
Gigi.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment