Re: [MW:27635] Preheat temp lower limit from min temp teg

what is welding process and code of contrustion

THANKS & BEST REGARDS,

KG.PANDITHAN, BE, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

On Wed, Apr 4, 2018 at 2:11 PM, 'smkabeer ahamed' via Materials & Welding <materials-welding@googlegroups.com> wrote:

Dear sir

Item description evaporator outlet header

Material Sa335 P91

Preheat temp 205 deg c min

Process. Induction heating

During welding preheat temp comes to 197 deg c. Please clarify either it is accepted or not.

If it is Accepted please provide relevent standards.  

Thanks and regards

S.M.Kabeer Ahamed

Quest Pvt Ltd Bangalore

9168605601

Sent from Yahoo Mail on Android

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.