Please see the snap shot of QW 424
Thanks & Regards
J.Gerald Jayakumar
0091-9344954677
On Wednesday, April 11, 2018 09:32:37 PM IST, George Dilintas <dilintas@gmail.com> wrote:
You have to read QW 403.1 and then QW 424 carefully. Your interpretation is wrong . If your PQR was done using a P15E and a P4, then you can support WPS which are for any P15E to any P4 ONLY
2018-03-28 10:38 GMT+03:00 srinivas <srinivasduraisamy@gmail.com>:
Hi--
This is Srinivas,I got a PQR P5A to P5A , So i can write WPS P5A to P4 from that P5A to P5A PQR ?Based on QW 424.1 ?
On Sunday, 6 April 2014 12:18:17 UTC+8, Binoy Lonappan wrote:As per Section IX QW 424 for procedure qualification it is given thatt
for base material range of qualification as P15 E metal to P4 metal is
qualified for any metal from P15E to P4 or P3,P1
But P number is an essential variable so what is the actual
interpretation of the above clause
Or does it means if we qualify procedure for P15E +P4 then it is
qualified for the P15E any metal from this group to any metal from
P4,P3 P1 groups
--
With Regards
Binoy Lonappan
+91-9645100560
QAC Engineer
TECCL
https://materials-welding. blogspot.com/
https://www.linkedin.com/ groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@ googlegroups.com.
Visit this group at https://groups.google.com/ group/materials-welding.
For more options, visit https://groups.google.com/d/ optout.
Dr. Georgios Dilintas,
Dipl. Ing. In Aeronautic and Space Engineering
Ph.D in Mechanics of Solids - Computational Mechanics
A.I.S, A.N.I, IRCA Lead Auditor
Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment