Re: [MW:25637] Damaged RF

Confirmation for the flange face roughness (AARH) -usually reported in microns inch against the standard requirements (e.g ASME B16.5)shall be produced as an evident 

Regards 

Sam

On Monday, 31 October 2016, Vijay Joshi <hivijay1970@gmail.com> wrote:

Dear experts,

A  2" RF WN flange gasket (or raised surface) area got blasted by oversight and NCR was raised by our client. We have done milling -machining on the surface to restore the raised face and it looks OK and acceptable but the client is asking for machining report.

How is it done, I mean to confirm that the flange is acceptable?

Can we see a standard report of such machining.

Thankfully,

Vijay Joshi

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABbs01aj%3D8jD6CzSWL4KOPu76BSg__RvWCBfzc2D%2B0reKr_wRA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
Sent from Gmail Mobile

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFTCtEA2mf6h7w%3DAekcoB%2BP7r2Yv8c2W8_zLS%2BspBW5rABHKpA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.