Re: [MW:25561] do we need seperate wps for repair

Check paragraph 328.6 & 328.2.1.

Since grooves for repair could differ from grooves for production, you may need to write a new WPS. However, you may support this WPS with an existing PQR if the essential (and supplementary essential in case of impact requirements) variables match

2016-10-17 7:05 GMT+03:00 anil kumar <anil.qcqa@gmail.com>:

Hi,

       Do we need separate wps for repair or the wps we used in production will be sufficient as per ASME B31.3,

and using the  PQR which used in production , can I qualify repair wps.

Thank you

ANIL KUMAR

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/083fabc6-d945-43b4-ab2b-a50ffd3cec46%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40BLudc1iHYek3JRXv_BwvK7hxRyTp3i5FnUr5AxYkiK6g%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.