Hi,
That EE - sour service with SS internal parts.
NL - No Limit of H2S Concentration.
Thanks and Regards,
Rajagopal Kannan
On 14 Oct 2016 1:36 p.m., <mylsamy.qc@gmail.com> wrote:
Dear raj,Can you please specify where is given N and L value in API and what is the component are you looking for?
Sent from my iPhone
On Oct 14, 2016, at 8:25 AM, 'raj susi' via Materials & Welding <materials-welding@googlegroups.com > wrote:<20161014_121208.jpg>Dear PrakashThanks for your reply.My question here is the -when the design parameter is -20 deg F to 250 deg F, can the Material class be only -50 deg F to 180 deg F?-50 deg F is more than -20 deg F, FINE for minus degree service.But 180 deg F is less than 250 deg F, should the material temperature be equal or greater than Design? this is my question in the previously attached report.regardsrajOn Thu, 13 Oct, 2016 at 17:16, Prakash Gotimukul<gprakash31@gmail.com> wrote:Who gave the design parameters? If given by client then, design it to that. Not the service parameters.On Mon, Oct 10, 2016 at 2:09 PM, 'raj susi' via Materials & Welding <materials-welding@googlegroups.com > wrote:Dear ExpertsGood day to all.I reviewed a DVR as per the attached,Design parameters:-Max working pressure 5000 psi.Design temperature -20 deg F to 250 deg F.Service SourService Material class EE NL.Here, SERVICE of the product is as below,EE denotes sour SERVICE=SAME AS DESIGN REQUIREMENT.N denotes -50 to 140 deg F. & L denotes -50 to 180 deg F.So we can combine and get NL as -50 to 180 deg F. NOT SAME AS DESIGN REQUIREMENT.MY QUESTION IS -DOES THIS PRODUCT SERVICE MATCH WITH DESIGN REQUIREMENT?Do we need to change the lower/higher temperature limit of design/service or it can be the same?Please give your valuable. comments on this subject.RegardsRaj--
http://www.linkedin.com/ groups/MaterialsWelding- 122787?home=&gid=122787&trk= anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@ googlegroups.com.
To post to this group, send email to materials-welding@ googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/ msgid/materials-welding/ 539457555.1002882. 1476094177885%40mail.yahoo.com .
For more options, visit https://groups.google.com/d/ optout.
--
http://www.linkedin.com/groups/MaterialsWelding- 122787?home=&gid=122787&trk= anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
To post to this group, send email to materials-welding@googlegroups.com .
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/ .CAOUP4qJdz% 3DAZaZaj89cNkRRFc0VvbhDqYPq6VW biBm-YSMUNrQ%40mail.gmail.com
For more options, visit https://groups.google.com/d/optout .
--
http://www.linkedin.com/groups/MaterialsWelding- 122787?home=&gid=122787&trk= anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
To post to this group, send email to materials-welding@googlegroups.com .
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/ 1412316375.105633. 1476419139756%40mail.yahoo.com .
For more options, visit https://groups.google.com/d/optout .
<20161014_121208.jpg><20161009_132033.jpg>--To view this discussion on the web visit https://groups.google.com/d/
http://www.linkedin.com/groups/MaterialsWelding- 122787?home=&gid=122787&trk= anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
To post to this group, send email to materials-welding@googlegroups.com .msgid/materials-welding/ .EB1F009E-D0DB-4B35-B836- 36B390C807E6%40gmail.com
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAD3oVpAKg9VDr7sXV%2BpxgPFD%3Dxw7ttec_WuCDHoOXV6g4i%3DKkA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment