thank you sir for your reply
if possible can you explain these in the para 328.6"
On Monday, 17 October 2016 08:20:10 UTC+4, anil kumar wrote:
recognizing that the cavity to be repaired may differ in
contour and dimensions from the original joint."
thank you
On Monday, 17 October 2016 08:20:10 UTC+4, anil kumar wrote:
Hi,Do we need separate wps for repair or the wps we used in production will be sufficient as per ASME B31.3,and using the PQR which used in production , can I qualify repair wps.Thank youANIL KUMAR
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d5fb69d6-7c9b-4a0d-8ed3-5d6cfeeda7aa%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment