Attached please find the 3.1 cert from air liquide which we purchased recently,please check with them.
On Fri, Oct 21, 2016 at 3:04 PM, Prakash Gotimukul <gprakash31@gmail.com> wrote:
Thats the way industry is giving. There is no problem in quality. Quality depends on the co.Thats why mosy clients give list of brands which are acceptable.Aleternative is to qualify electrode by taking all weld sample which is very expensive and not worth the effortOn Fri, Oct 21, 2016 at 2:30 PM, Kumar <sk7920541@gmail.com> wrote:Dear Experts,
Greetings.
Requesting the views on MTCs (EN 10204 ) for electrode ( SFA/AWS A
5.1 E 7018-1 H 4 R, 4.00mm). In fact according to project spec. it
should be 3.1. but the contractor could only provide 3.1 for chemical
& mechanical 2.2 in a single MTC.
Since its a deviation from the spec., how far this will affect the
quality of the product when mechanical according to 2.2 & chemical
according to 3.1? how this could be convinced to the end user.
Your valuable feedbacks are appreciated.
thanking in advance,
Kumar.
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home= &gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
To post to this group, send email to materials-welding@googlegroups.com .
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALuBtp9 .j4g08J_sEsjtQ15OF2%2BUyZh8k1v9 ky8arTPB53bbVtA%40mail.gmail. com
For more options, visit https://groups.google.com/d/optout .
To view this discussion on the web visit https://groups.google.com/d/--
http://www.linkedin.com/groups/MaterialsWelding- 122787?home=&gid=122787&trk= anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
To post to this group, send email to materials-welding@googlegroups.com .msgid/materials-welding/ .CAOUP4qKAcVHHN5Bt%3D% 2Bux8q0JL_niipD%3Dwc7nj%3Dm_ pu%3DgJdp4aQ%40mail.gmail.com
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOi%3DZp_TbeE6YTkp6n1e1g-huVW9F2fOFHOXecReE72Ey%2BfKmA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment