First for flaw detecting - side wall lack of fusion you can get it by Ultrasonic testing A scan
or more clarity for 3 D you can get it by PAUT. By destructive testing method it is not
possible or utmost you may get macroscopic
On Fri, 17 Jan 2014 09:35:48 +0530 wrote
> An experience UT operator with A-Scan could size this defect
best regards
Dr. Georgios Dilintas
Authorized Nuclear Inspector
Authorized Inspector Supervisor
API 510 Inspector
I&F REGIONAL TECHNICAL MANAGER
BUREAU VERITAS HELLAS
Tel: +30 210 40 63 113/4
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
(See attached file: Dilintas_George.vcf)
Gurmeet singh Mehta ---14/01/2014 17:49:58---Dear It is not easy to check with destructive
testing. If you want tha we should
From: Gurmeet singh Mehta
To: materials-welding@googlegroups.com
Date: 14/01/2014 17:49
Subject: Re: [MW:19860] Side wall lack of fusion
Sent by: materials-welding@googlegroups.com
Dear
It is not easy to check with destructive testing. If you want tha we should identify the
location of the defect. send the sample to lab. Ask the lab to get a cross section and carry
out macro examination which will help you to measure the defect.
Regards
Gurmeet
On Thu, Jan 9, 2014 at 10:50 PM, Sara Vana
Dear experts, How to measure side wall lack of fusion by destructive testing.
Component : butt welding of plates
Joint configuration : groove weld with included angle sixty degree --
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for
educational purposes only, Users must take their own decisions w.r.t. applicable
code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding"
group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-
welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for
educational purposes only, Users must take their own decisions w.r.t. applicable
code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding"
group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-
welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
This message contains confidential information.
To know more, please click on the following link: http://disclaimer.bureauveritas.com
--
>
To post to this group, send email to materials-welding@googlegroups.com
>
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
>
The views expressed/exchnaged in this group are members personel views and meant for
educational purposes only, Users must take their own decisions w.r.t. applicable
code/standard/contract documents.
>
---
>
You received this message because you are subscribed to the Google Groups "Materials & Welding"
group.
>
To unsubscribe from this group and stop receiving emails from it, send an email to materials-
welding+unsubscribe@googlegroups.com.
>
For more options, visit https://groups.google.com/groups/opt_out.
>
Dear Sir,
Thanking You.
With Warm Regards,
Muthu barathi P,
Mobile No. +918511180665
 |
Get your own FREE website, FREE domain & FREE mobile app with Company email. | Know More > |
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment