Re: [MW:19962] welder qualification renewal

Hi Kumar, 

To cut the long story short.

The criteria for renewal is WELDING PRO CESS ONLY.

Position, groove configuration, uphill downhill, with backing without backing, F no used, material used, thickness,  etc is not a factor to be considered for renewal, however some clients may ask for proof for renewal in terms of volumetric NDE reports, for groove welders. Hence it is always better to have some back up.

Just my 2 cents.

Sent from Samsung Mobile

-------- Original message --------
From: Kumar
Date:30/01/2014 15:42 (GMT+08:00)
To: materials-welding
Subject: Re: [MW:19961] welder qualification renewal

Dear all
This means if the welder has performed in the particular processes irrespective of the positions and configurations, his qualifications can be considered as renewed..I think.. (ie..welder had qualified for 6g but done 1g sometimes in 6 month..but still he can be renewed for 6g..) kindly confirm
Thanks in advance,
Kumar.

On Jan 30, 2014 11:24 AM, "veera raghava kommisetti" <kommisetti@gmail.com> wrote:

Only Process matters.. Not weld configuration.

On Wed, Jan 29, 2014 at 3:58 PM, gulrez alam <gulrezhhi@gmail.com> wrote:

Dear experts

Can you explain to me .if any welder is qualified 6 month before with 2 " pipe .but this 6 month the welder is doing only fillet weld .

so i want to know this welder qualification is renew on his continue welding or need to retest.

Best regards 

G.Alam

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.