Not for any repair, only to base metal
Best regards
Dr Georgios Dilintas
Authorized Nuclear Inspector
Authorized Inspector Supervisor
HBS Regional Technical Manager
From: Bala Nechur [bala.Nechur@phoenixindustrial.ca]
Sent: 01/27/2014 11:13 PM GMT
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Subject: RE: [MW:19936] ASME Section VIII D1 U stamped vessel
Hello Najim,
Any repair on ASME vessel AI to be informed. In addition you have to prepare repair procedure stating depth of the damage and after repair remaining thickness .
Bala Nechur,
Corporate QA/QC Manager
+ 1780 204 0239
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of NAJM UL ISLAM
Sent: January-27-14 5:08 AM
To: materials-welding@googlegroups.com
Subject: [MW:19934] ASME Section VIII D1 U stamped vessel
Dear Experts,
Good Day,
We received above vessel with little surface damage say 1 or 2 mm deep maximum, vessel is post weld heattreated. We checked and conclude that only grinding can solve the matter. Can anyone guide that with only grinding (no welding activity is involved) we can repair without consulting ASME A.I. and without R stamp.
A quick reply from the team is highly appreciable.
Regards,
NAJM UL ISLAM
Metallurgical Engineer
+966 54 8180443
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment