RE: [MW:19908] Welding consumable for cladded plate SA516 Gr70 with SS316

Dear Thuan,

According your requirement of cladding SA516-70 / SS316, begin the work  of "buttering"  with ER-309 filler to facilitate the microstructural transition between CS vs SS. This "buttering" can be 1 mm thickness and following use ER-316L filler to end  up with 2 mm thickness. Use SMAW process, and depending of the cladding area to cover, change the aplication by SAW process, then you need a other welding material of common use in SAW process to joint  SA516-70 / SS316L.

Regards, 

Ramon Briceno

Metallurgical Engineer.

  

---

From: dthuan117@gmail.com
To: materials-welding@googlegroups.com
Subject: [MW:19902] Welding consumable for cladded plate SA516 Gr70 with SS316
Date: Wed, 22 Jan 2014 12:10:55 +0700

Dear Expert ,

We have vessel shell plate A516-Gr 70 cladded with SS316 L, For the plate thickness: 25MM-40MM cladded 3mm.

Could you please advise the filler material selection and welding sequence for LS and CS.

I intend to use welding process FCAW and SAW. Or SMAW and SAW.

 

Thanks and Best regards,

 

 

 

Regards,

Thuan, Vu Duc

Mobil: +84 983 017 936

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.