Dear sir ,
you need to cut circumference bevel location 45deg by machine
The calculation is 2times of run pipe thickness only you can weld.
for ex your run pipe thickness is 13 mm so you need to weld 26 mm only and during weld need to maintain the inter pass that is main.
pls find the pic. vertical down welding need to use.
Regards,
srinivasa.M
From: Philip Taiye <constructionmanager.eelgpii@gmail.com>
To: materials-welding@googlegroups.com
Cc: mohamed.elsahhar2000@gmail.com
Sent: Monday, 30 September 2013 1:40 PM
Subject: Re: [MW:18817] Welding 36'' X 24'' Split tee(A 234 Gr WPB) on 16mm thick pipeline(API 5LX-65) carrying gas
Dear Mohamed,
Kindly find attached the split tee picture for your use.your swift response will be appreciated.On Sat, Sep 28, 2013 at 11:12 PM, Mohamed Elsahhar <mohamed.elsahhar2000@gmail.com> wrote:
dear Friend
pls. clarify the nest point to help you
- please send me the picture of split tee to determine the fillet joint design
- the welding will done as a hot tap (pipe line in service) or just
weld the spit tee with pipe
QA/QC ENGINEER AT PETROMAINT /EGYPT
> --
On 9/27/13, PHILIP <constructionmanager.eelgpii@gmail.com> wrote:
>
> Gents,
>
> We are currently faced with a challenge with regards to welding a 50mm thick
> split tee fitting on a 16mm gas pipeline, Could any one help me with past
> experience on this with regards to structural integrity of the weld and
> welding issues encountered.
>
> Best Regards
>
> Philip .T
>
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.
>
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
Best Regards
Philip .T
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment