Ankit,
Ask your TPI that where the lateral expansion requirements are mentioned as manadatory?
ASME B31.3 says about the requirement of LE of P8 steels, but if your project specification
includes that value also under acceptance criteria, think about alternative way.....welding and testing a new coupon?
Respectfully,
Nandesh Kumar
--- On Thu, 1/11/12, Ankit PAtel <ankit.patel@orientalindia.net> wrote:
From: Ankit PAtel <ankit.patel@orientalindia.net> Subject: [MW:15830] requirment of Lateral expansion for P1 TO P8 PQR as ASME Sec IX To: materials-welding@googlegroups.com Date: Thursday, 1 November, 2012, 6:58 AM
Dear Experts, We have performed a PQR for 25 thk plate , P1(SA 516 GR-70 ) To P8(SA 240 TP-316L). These PQR has been stress relieved at 620° C & impact tested at -20°C. The testing laboratory has noted down only the joule values for the impact test, but they have not noted the Lateral Expansion Values P-8 Material. The Avg. Joules Values observed are as follows: Weld-72.67 J HAZ(GR-70)-35.33J HAZ(GR-316L)-158 J PARENT(GR-70)-51.33J PARENT(GR-316L)-298 J Now our TPI says that for GR-316L Lateral Expansion Values is must for acceptance of the PQR. Is it so? Or based on these joules values these PQR can be accepted & used for weld having requirement of impact test at -20°c Thanks & Regards Ankit Patel Engineer Quality -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment