Re: [MW:14333] SAW consumable for welding 4130

Hi Vikas,

U need As welded or Stress relief requirement?

Thanks

On Mon, May 21, 2012 at 5:51 PM, Vikas Bhandari <vikas.bhandari349@gmail.com> wrote:

Hi 

Can you please guide which consumable manufacturer' consumables are commonly used for welding low 

alloy steel (AISI 4130, yield 520 MPa, Tensile 670 MPa, impacts at minus 30) with SAW process.

Thanks

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.