Hi Bohler Welding - Union S3 NIMO1(EF3) wire with UV 420 TTR-C flux gives better results. Thanks Regards S.Eswaran 0065-96163449
--- On Mon, 21/5/12, Vikas Bhandari <vikas.bhandari349@gmail.com> wrote:
From: Vikas Bhandari <vikas.bhandari349@gmail.com>
Subject: [MW:14325] SAW consumable for welding 4130
To: materials-welding@googlegroups.com
Date: Monday, 21 May, 2012, 3:21 PM
Hi
Can you please guide which consumable manufacturer' consumables are commonly used for welding low alloy steel (AISI 4130, yield 520 MPa, Tensile 670 MPa, impacts at minus 30) with SAW process.
Thanks -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment