Dear Sir,
-- I think u may have to use a buttering layer.
--
2011/9/27 K.Babu <kbabupsg@gmail.com>
Gents,
Do you have idea on the Inconel 625 Overlay on the AISI 4130/4140
I used P-GTAW, with 150deg cel as preheat & Max . Inter pass is 240 deg cel, PWHT -590 deg. Cel for 3 hrs to reduce the hardness to below 250 VHN
In micro analysis, HAZ showing the carbide precipitates.
Any idea, on why happened like this?
RegardsK.Babu--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
regards,
Harish.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment