Dear ALL,
Please refer below Client Specfication which quotes ---
Hydrostatic pressure testing shall be performed with gaskets and bolting identical to those required in service and as specified on the data sheet. These gaskets may be used as service gaskets if the bolted joint is not disassembled after completion of hydrostatic pressure testing.
I believe as per the above requirment only SS Fasteners and Blind flanges shall be used during the hydrotest of
SS Vessel UNLESS Data Sheet/Drawing is allowing to use CS Fasteners and Blind flanges for hydrotest.
Please suggest.
Thanks & Regards
Asad Azmi
Greetings.
Please refer below Client Specfication which quotes ---
Hydrostatic pressure testing shall be performed with gaskets and bolting identical to those required in service and as specified on the data sheet. These gaskets may be used as service gaskets if the bolted joint is not disassembled after completion of hydrostatic pressure testing.
I believe as per the above requirment only SS Fasteners and Blind flanges shall be used during the hydrotest of
SS Vessel UNLESS Data Sheet/Drawing is allowing to use CS Fasteners and Blind flanges for hydrotest.
Please suggest.
Thanks & Regards
Asad Azmi
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment