Re: [MW:8869] ELECTRODE

acceptable. but please check why they have used 316L in wps Thanks & Regards, (Karthik) Karthikeyan.S QA/QC Manager Getabec Energy Co.,Ltd. 379,Moo6,Soi8,Nikhomphatana, Rayong-21180, Thailand. Phone: 0066 38 897035-8 (Off) Fax: 0066 38 897034 Hand Phone: 0066 892512282 --- On Wed, 12/22/10, KUMAR <kumartkp@gmail.com> wrote: From: KUMAR <kumartkp@gmail.com> Subject: [MW:8866] ELECTRODE To: materials-welding@googlegroups.com Date: Wednesday, December 22, 2010, 11:55 AM Dear sir, In weldoverlay  smaw  process welding, the changing electrode E309L in place of E316L is acceptableor not?  It  mentioned in WPS that E309L is for barrier Layer and E316L for clad layer Thanks and regards M.Kumar -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.