RE: [MW:8812] Reducing hardness of EN-24 material.

Hi Priyanka,

 

EN-24 steel is an unconventional steel (typically machinery steel ) which could be surface hardened and generally popular in machinery components.See the attached data sheets FYI .

 

What's the intended application?? accordingly you have to specify the correct heat treatment. Otherwise you would end up with products with wrong specifications.

 

Feel free to revert back with queries.

 

Thanks.

 

Pradip Goswami,P.Eng.,IWE.

Welding & Metallurgical Specialist & Consultant

Email-pgoswami@sympatico.ca,

pgoswami@quickclic.net

 

---

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Harish Kannepalli
Sent: Sunday, December 19, 2010 9:48 AM
To: materials-welding@googlegroups.com
Subject: Re: [MW:8807] Reducing hardness of EN-24 material.

Please do annealing instead of normalising.

2010/12/19 Priya Deshmukh <piyuwillseeu@gmail.com>

Dear All,

 

I wanted to reduce the hardness of EN 24 material. For that I employed Normalising on the material.

 

But the hardness increased instead of reducing.

 

Can U please suggest me the reasons for this and how to reduce the hardness of the material.

 

Thanks & Regards,

 

Priyanka Deshmukh.

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--

regards,

Harish.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.