[MW:8113] Re: blasting and painting

water sprinkling only acceptable on inorganic zinc silicate, not to
another paint

Haseeb
KSA

On Nov 5, 4:41 pm, Ash_Ish Soni <ashishson...@gmail.com> wrote:
> In case of High RH, sometimes paint manufacturer also suggest to do water
> spray on paint after painting.
>
>
>
>
>
>
>
> On Fri, Nov 5, 2010 at 6:04 PM, haseeb ph <hasee...@gmail.com> wrote:
> > there is no prob for that, but we have to consider some environment
> > conditions like dew point, relative humidity and steel temp,please consider
> > the paint  which you are going to apply like if you are going to use
> > inorganic zinc, we can apply even if RH little high
>
> > Haseeb
>
> > On Thu, Nov 4, 2010 at 8:04 PM, srinivas rao <ksrv...@gmail.com> wrote:
>
> >> Dear All,
>
> >> Can we allow blasting and painting in the night?
> >> If no, pls let me know why.
>
> >> Thanks and Regards,
>
> >> srinivas
>
> >> --
> >> To post to this group, send email to materials-welding@googlegroups.com
> >> To unsubscribe from this group, send email to
> >> materials-welding+unsubscribe@googlegroups.com<materials-welding%2Bunsubscr ibe@googlegroups.com>
> >> For more options, visit this group's bolg at
> >>http://materials-welding.blogspot.com/
> >> The views expressed/exchnaged in this group are members personel views and
> >> meant for educational purposes only, Users must take their own decisions
> >> w.r.t. applicable code/standard/contract documents.
>
> >  --
> > To post to this group, send email to materials-welding@googlegroups.com
> > To unsubscribe from this group, send email to
> > materials-welding+unsubscribe@googlegroups.com<materials-welding%2Bunsubscr ibe@googlegroups.com>
> > For more options, visit this group's bolg at
> >http://materials-welding.blogspot.com/
> > The views expressed/exchnaged in this group are members personel views and
> > meant for educational purposes only, Users must take their own decisions
> > w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.