Re: [MW:5705] Using E6010+E6018 for SA 333 Gr.3

Dear Mr.Prasad,

Thanks for your feed back. But which electrode we use for the root.

Regards,

DHINESH

On Tue, Jun 22, 2010 at 9:50 AM, N VENKATESWARA PRASAD <weldengr.velosi@gmail.com> wrote:

Dear Dhinesh,

 

SA 333 Gr.3 ( 3.5 Ni alloy steel) is  low temperature steel  used upto - 100 C which comes under P 9 group and electrode used shall be E 8018 C2.   E 6013 and E 6018 are not at all suibtable for welding of the above material.

 

regards.

N.V. PRASAD

WELDING ENGINEER

VELOSI CERTIFICATION

On Mon, Jun 21, 2010 at 1:25 PM, dhinesh <dhineshsir@gmail.com> wrote:

Dear All,

        I would like to understand what are the causes appear if you
weld the material SA 333 Gr.3 using the electrodes E6010 + E6018. I

any possibilities these electrodes acceptable to weld SA 333 Gr.3.

Regards,

DHINESH

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.