Re: [MW:5704] Chloride stress Corosion for SS316(For See Enveronemt)

Hi Babu\Bathula,

 

Thanks for your advices,

 

If i am using the SS316 Gaskets for Duplex steel and the temperature is 80 deg C,is it acceptable.

 

I am thinking that when gaskets are compressed the stress corossion may not occur

 

Please give your feedbacks

 

Regards,

 

Prakash K B

On Tue, Jun 22, 2010 at 12:02 PM, Kathalingam Babu <kathalingam.qaqc@ppl.com.sg> wrote:

Hi

 

For the sea environment (Where sea water exposure or low flow rates) SS316 will not be suggested.

 

Rgds,

 

K.Babu

 

 

----- Original Message -----

From: prakash kamathuru

To: materials-welding@googlegroups.com

Sent: Tuesday, June 22, 2010 5:49 PM

Subject: [MW:5700] Chloride stress Corosion for SS316(For See Enveronemt)

Hi all,

 

Can any one advise me usage temperature for SS316L in offshore enveronemnt.

 

As for as i know it can be used up to 60 degc.But now i have temprature of 80 Deg C.If any on eknows and have information abt this pls reply me.

 

And the same Case is Applicable for SS316 L RTG Gaskets also.

 

Regards,

 

Prakash K B

On Mon, Jun 21, 2010 at 7:06 PM, Sandeep Kp <sandeepkp99@yahoo.com> wrote:

Dear All,

I am going to conduct CSWIP 3.1 Examination on coming 05-july-10.

Any body have latest(2010) model questions of the same? or can advice any web sites.

 

 

 

Thanks,

 

Sandeep.k.p

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.