Skip to main content

RE: [MW:5703] Chloride stress Corosion for SS316(For See Enveronemt)

By Materials & Welding

yes  austenitic SS is restricted to 60 °C, these limits are from NACE MR0175/ISO 15156 barring certain compressor items and instrument tubing, you may choose other alloys from Table A8

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Kathalingam Babu
Sent: Tuesday, June 22, 2010 3:32 PM
To: materials-welding@googlegroups.com
Subject: Re: [MW:5702] Chloride stress Corosion for SS316(For See Enveronemt)

Hi
 
For the sea environment (Where sea water exposure or low flow rates) SS316 will not be suggested.
 
Rgds,
 
K.Babu
 
----- Original Message -----
Sent: Tuesday, June 22, 2010 5:49 PM
Subject: [MW:5700] Chloride stress Corosion for SS316(For See Enveronemt)

Hi all,
 
Can any one advise me usage temperature for SS316L in offshore enveronemnt.
 
As for as i know it can be used up to 60 degc.But now i have temprature of 80 Deg C.If any on eknows and have information abt this pls reply me.
 
And the same Case is Applicable for SS316 L RTG Gaskets also.
 
Regards,
 
Prakash K B


Comments

Post a Comment

Popular posts from this blog

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more

[MW:30043] Weep hole

By Materials & Welding
If weep hole is not provided in dummy pipe before welding What will happen??? -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/da251ee6-fa7f-4851-b876-cdb3834ae341%40googlegroups.com .
Post a Comment
Read more

[MW:36169] Cold Bending Qualification

By Materials & Welding
Dear Experts,  Can anyone share the inspection requirements or a qualification procedure for cold bending? Our client spec states only the requirements for induction bending and would like to know your opinion on the cold bend inspection requirements. The code of construction is B31.3, Max. 5D bends, A106 SS 316L.  Thanks in Advance. -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion visit https://groups.google.com/d/msgid/materials-welding/1be61cc3-e9c9-4a5f-834d-e8485e248432n%40googlegroups.com .
Post a Comment
Read more