Re: [MW:4537] RE: 4531] qualified range for base metal

Dear Mr.Bathula Raghuram

thank you for reply.

i can't refer QW424, due to the clad material is unassigned material.is it right or not?

regards

---

From: Bathula Raghuram (Mumbai - PIPING) <R.Bathula@ticb.com>
To: materials-welding@googlegroups.com
Sent: Thu, March 11, 2010 9:14:46 AM
Subject: [MW:4533] RE: 4531] qualified range for base metal

you can't, refer QW424.

Your PQR qualified on P1 to P43, where as you need to weld P1 to P1 which is cladded with P43

---

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Ali Asghari
Sent: Thursday, March 11, 2010 10:26 AM
To: materials-welding@googlegroups.com
Subject: [MW:4531] qualified range for base metal

Dear All

i have a qualified wps that X65 WELDED WITH INCONEL 625.  

I think it can be used for welding of clad materials, but my owner have opposite idea.

according ASME IX (wich paragraph) it is clarified? (clad pipe consisted from inconel 625 & X65)

regards 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.