Skip to main content

[MW:2814] Re: SA-276 type 316 Bar

By Materials & Welding
Dear Mr Devang,

I have used welding on the same no problem faced


Regards

Israr Ahmed


On Jun 29, 1:06 pm, "Devang Patel" <deva...@inoxindia.com> wrote:
> I want to weld SS-304L cleat on it by GTAW.
>
> Regards,
>
> Devang Patel
> Manager Engineering
>
> INOX INDIA Ltd.
> Ph :+91-265-3056392-3056100
> Fax :+91-265-2333398-2341449
> email : deva...@inoxindia.comwww.inoxindia.com
>
>
>
>   ----- Original Message -----
>   From: Shashank Vagal
>   To: materials-welding@googlegroups.com
>
>   Cc: deva...@inoxindia.com
>   Sent: Monday, June 29, 2009 12:14 PM
>   Subject: Re: [MW:2570] SA-276 type 316 Bar
>
>         Devang,
>         What welding exactly you want to do here, if you could elaborate on that, the members will be in a better position to answer...
>         Rgds,
>         Shashank
>
>         --- On Mon, 29/6/09, Devang Patel <deva...@inoxindia.com> wrote:
>
>           From: Devang Patel <deva...@inoxindia.com>
>           Subject: [MW:2570] SA-276 type 316 Bar
>           To: materials-welding@googlegroups.com
>           Date: Monday, 29 June, 2009, 11:21 AM
>
>           We have a rod of SA-276 TP316 with Condition S, Some of my senior told, welding is not permitted on this rod but i have not found any restriction in ASME code.
>
>           Can anyone know about it?
>
>           Regards,
>
>           Devang Patel
>           Manager Engineering
>
>           INOX INDIA Ltd.
>           Ph :+91-265-3056392-3056100
>           Fax :+91-265-2333398-2341449
>           email : deva...@inoxindia.com
>          www.inoxindia.com
>
> ---------------------------------------------------------------------------­---
>   Love Cricket? Check out live scores, photos, video highlights and more. Click here.- Hide quoted text -
>
> - Show quoted text -

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

Comments

Post a Comment

Popular posts from this blog

Re: [MW:34105] SA266 GR4N 4 Cycle SPWHT

By Materials & Welding
Hi,  You are correct, Minimum refers to the one cycle for which this part will expose until final work shop PWHT. hence mill test certificate shall include this.  Max. SPWHT, refers to additional cycles of heat treatment that are reserved for future repairs during equipment lifetime.  Again, these simulated no. Of cycles shall be specified in MTC.  The idea is we need to make sure that steel mechanical properties are not compromised upon exposure to multiple repairs (i e 4 cycles in your case).  One could say, if steel is subjected to 4 cycles and is ok, then it should by defacto be good for one cycle, yet, this is wrong assumption cause mechanical problems and microstructure of materials varies accordingly based on no. Of cycles for which material will expose. This is apparent in alloy steel and especially for impact test values as an example.  In your case, this forged CS with properties before PWHT can be understood to be " as forged" condition (i.e. Wit...
Post a Comment
Read more

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more

Heat tint (temper) colours on stainless steel surfaces heated in air // Heat tint

By Materials & Welding
Introduction The colour formed when stainless steel is heated, either in a furnace application or in the heat affected zone of welds, is dependent on several factors that are related to the oxidation resistance of the steel. The heat tint or temper colour formed is caused by the progressive thickening of the surface oxide layer and so, as temperature is increased, the colours change.   Oxidation resistance of stainless steels However, there are several factors that affect the degree of colour change and so there is no a single table of colour and temperature that represents all cases. The colours formed can only be used as an indication of the temperature to which the steel has been heated. Factors affecting the heat tint colours formed Steel composition The chromium content is the most important single factor affecting oxidation resistance. The higher the chromium, the more heat resistant the steel and so the development of the heat tint colou...
Post a Comment
Read more