Same as Nilesh told if you want to make a carrier in
Coating or Corrosion , you can go for NACE, Or if you want to be in
Mechanical field go for BGas. I am level 2 in NACE CIP.
Regards,
Y.C.Shiva,
+974 6166465
On 7/23/09, Nilesh Pathare <patharenil@gmail.com> wrote:
> Dear Kevin,
> If you want to do your carrier as Painting Inspector then NACE Level II is
> always good since you can do Painting as well as Coating Inspection with
> this.
> And also in future you can go for NACE Level III.
> But if you are QA /QC Inspector and wants to take certificate to carry out
> painting inspectionsthen CSWIP -BGAS also good.
> Choice is yours!
>
> Regards,
> Nilesh Pathare.
>
> On Wed, Jul 22, 2009 at 11:12 AM, kevin mathew
> <kmvkeralaa@yahoo.co.in>wrote:
>
>> Dear sirs
>> Can any one tell which Painting course(NACE/BGAS) is better to get an
>> brighter exposure in inspection field.
>>
>>
>>
>> *Thanks & Regards*
>>
>> * *
>> kevin mathew varghese
>> *9601670905*
>> kmvkeralaa@yahoo.co.in
>> kmvkerala@gmail.co.in
>>
>>
>> *P** **Please consider your environmental responsibility before printing
>> this e-mail.***
>> *
>> *
>>
>>
>>
>> ------------------------------
>> Yahoo! recommends that you upgrade to the new and safer Internet Explorer
>> 8<http://in.rd.yahoo.com/tagline_ie8_1/*http://downloads.yahoo.com/in/internetexplorer/>
>> .
>> >
>>
>
>
> --
> Best Regards,
>
> Nilesh Pathare
>
> >
>
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
No comments:
Post a Comment