Skip to main content

[MW:2834] Re: 2827] AWS-CWI best agency in INDIA

By Materials & Welding

Iwhat is the meninig of IQS
Thanks & Regards,

K.GANESAN
Quality Control
ISGEC / ISGEC John Thompson,
A-4 Sector-24 Noida-201301 (UP)
Tel. +91-120-2411175
Direct Tel. +91-120-2411175
Mobile : +91-9952166894

--- On Tue, 28/7/09, SLM <smahuri@lntecc.com> wrote:

From: SLM <smahuri@lntecc.com>
Subject: [MW:2829] RE: 2827] AWS-CWI best agency in INDIA
To: materials-welding@googlegroups.com
Date: Tuesday, 28 July, 2009, 9:20 AM

Yes, you have rightly heard.

 

Among the four listed agencies IQC is the best. As most of my friends have completed this course successfully through IQC only.

So you can opt for IQC.

 

 

Thanks and Regards,

 

Snehkumar L Mahuri

Regional Quality Manager

HC&P (Vertical)

 

M : 9428819849

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of PREMSHANKARDUTTNAUTIYAL
Sent: Tuesday, July 28, 2009 9:04 AM
To: materials-welding@googlegroups.com
Subject: [MW:2827] AWS-CWI best agency in INDIA

 

Hi Friends

I stay in Mumbai and have prepared for AWS-CWI and want to appear for Course + Exam in the next couple of months. But in India there are 4 AWS approved agencies which conduct this AWS course.I am confused as to which agency i should select as i have to invest a huge amount of money... .

1)Industrial Quality Concepts
Address: IQC Training & Services, Pte, Ltd
Shivani Block -1, Ist Floor
40 East Coast Road
Chennai, India 600041
Telephone: 91-44-42158714/42158715/24451009
Fax Number: 91-44-5215-8715
Email: iqc.in.org@vsnl.com
Contacts: Sundaran Baskaran

2)BETZ Engineering & Technology Zone
Address: 49-Vellalar Street
Near St Thomas Mount Railway Station
Chennai - 600088
INDIA
Tel: 91-44-65364123/22441234
TeleFax: 91-44-22441234
Email: betzzone@vsnl.net
Site: www.betzinternational.com

3)DASH Inspectorate
Address: 3rd Floor,Iswar Krupa Building Near Bank Of India,
Saffron Circle,Fatehgunj,
Baroda-390002,Gujarat,India
Phone: +91 265 2750116, 3017474
Fax: +91 265 2788278
Site: www.dashinspectorate.com

4)Agency: Moody ICL Certifications Limited
Address: #372, Industrial Area Phase I
Panchkula
Haryana
India
PIN 134112
Website: www.moodyint.com

Hence can anyone guide me from their past experience as to which agency is the best. Please give your unbiased opinion..
I have heard from all my colleagues that IQC,chennai is the best and most experienced in conducting CWI.

Please guide me to select the best agency which will provide good preparatory training.

Regards

Prem Nautiyal
Mumbai.

PREM S NAUTIYAL

CELL : 9820313278

</Table


 

"This Message and its contents is intended solely for the addressee and is proprietary.Information in this mail is for L&T Business Usage only. Any Use to other than the addressee is misuse and infringement to Proprietorship of L&T ECC.If you are not the addressee please return the mail to the sender.L&T ECC DIVISION"

See the Web's breaking stories, chosen by people like you. Check out Yahoo! Buzz
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

Comments

Post a Comment

Popular posts from this blog

Heat tint (temper) colours on stainless steel surfaces heated in air // Heat tint

By Materials & Welding
Introduction The colour formed when stainless steel is heated, either in a furnace application or in the heat affected zone of welds, is dependent on several factors that are related to the oxidation resistance of the steel. The heat tint or temper colour formed is caused by the progressive thickening of the surface oxide layer and so, as temperature is increased, the colours change.   Oxidation resistance of stainless steels However, there are several factors that affect the degree of colour change and so there is no a single table of colour and temperature that represents all cases. The colours formed can only be used as an indication of the temperature to which the steel has been heated. Factors affecting the heat tint colours formed Steel composition The chromium content is the most important single factor affecting oxidation resistance. The higher the chromium, the more heat resistant the steel and so the development of the heat tint colou...
Post a Comment
Read more

[MW:5202] RE: 5200] NDT after PWHT

By Materials & Welding
------------------------------------- Interpretation:  I‑89‑14 Subject:         Section I (1986 Edition, 1987 Addenda), PW‑11,                  NDE Prior to PWHT Date Issued:     December 15, 1988 File:            BC88‑393   Question: Does PW‑11 require that NDE be performed on welds after they have been subjected to the postweld heat treatment required by PW‑39?   Reply: No, unless the conditions described in PW‑11.2.2 exist. ---------------------------------------------- Interpretation:  VIII-1-98-09 Subject:         Section VIII, Division 1 (1995 Edition, 1996 Addenda); NDE                 ...
Post a Comment
Read more

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more