Hi Varmazyar,
Yes we can use 6010 or 7018 at root.But i our
case , why it happened , why crack came ??
Regards,
YC.Shiva,
QA/QC Engg,
Doha Qatar,
+974 6166465.
On 7/22/09, Ali Varmazyar <
av-ssg@msa.ir> wrote:
>
> Surry, I forget to talk about your service. if your service is sour then you
> must consider Nace MR0175/ISO15156-2 requirements too.
>
> Best Regards
>
> A. Varmazyar
>
> MSA -Welding Engineering Department
> Msa,Arak,Markazi,IRAN - P.O. 148
> Tel.: +988612172725~6
> Fax: +988612172702
>
>
> -----Original Message-----
> From:
materials-welding@googlegroups.com> [mailto:
materials-welding@googlegroups.com] On Behalf Of shiva
> Sent: Tuesday, July 21, 2009 6:04 PM
> To: Materials & Welding
> Subject: [MW:2742] Weld Crack at Root trough weld metal
>
>
> We are using API 5L X65 grade material for sour environment. With
> reference to our WPS we used (Ador electrodes) e 8010 for root and
> 8018 for hot fill pass.
> We took NDT and its okay. But after 1 month 4 weld joints crack. We
> checked the macro hardness for existing and cracked joint . There was
> a high hardness eg 351, 329 on root and in weld metal cap side 280
> above. Which is very high.
>
> Can you please tell me for this material what type of electrodes to be
> used? And why this occoured ?? And what may be possible reason for
> this occourance?
>
> Regards,
> Y.C.Shiva,
> QA/QC Engineer,
> +974 6166465
> Doha Qatar.
>
>
>
> >
>
¡Obtén la mejor experiencia en la web!
Descarga gratis el nuevo Internet Explorer 8.br> http://downloads.yahoo.com/ieak8/?l=mx --~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
Dear All anyone can share a format for welder certificate and card format Thanks & Best Regards Saleem manhappulath Mob:+9665...
No comments:
Post a Comment