Hi,
Check www.specialmetals.com on details on Inconel 600, and www.specialmetalswelding.com click joining brochure to know more about welding of ni-base-alloys
Regards,
Marco
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of PB HEGDE
Sent: 25 July 2009 08:30
To: materials-welding@googlegroups.com
Subject: [MW:2806] RE: 2805] Inconel 600
Hi!
For Inconel 600 matching consumables are
SMAW-ENiCrFe3
ii)TIG-ERNiCr3 with Nuclear grade Argon with ,Proper purging , Use of Pulse tig ,with lower heat input will be able to produce good weld.
iii) I had experience of using Incoalloy filler w/o any problem
iv) I have bad experience of using Mig process hence can not share my experience
Other wise with good engg practices , not much problem of handling Inconel 600
Regards
Hegde
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of sorin stefan
Sent: Friday, July 24, 2009 8:06 PM
To: materials-welding@googlegroups.com
Subject: [MW:2805] Inconel 600
Hi Guys,
Please tell me what is the best match of the filer material and gas for welding ALLOY 600 ( plates 1/4"up to3/") using MIG and TIG procedures.
If you also have some welding giudelines - welding procedure regardless, it will be great
Getting an answer ASAP it will be very much apreciated
Thanks a lot
Sorin St.
Stay on top of things, check email from other accounts! Check it out.
lang=EN-US>
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
No comments:
Post a Comment