Kim,
Yes, if pulsation dampeners need to be U stamped then, certainly there may be extra charges applicable for the Stamping.
Regards
Somesh Kumar Pandey
Sr. Engineer- Mechanical
KBR Energy & Chemicals
Office: +65 6210 7459
Fax: +65 6210 7250
Email: Somesh.Kumar@kbr.com
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Kim Shih Yuen
Sent: February 2, 2009 4:18 PM
To: materials-welding@googlegroups.com
Cc: shihyuen81@yahoo.com
Subject: [MW:1497] Re: 1482] ASME VIII
Dear Somesh,
Thank you for the information.
I need some clarification form you. For example, a pulsation dampener is always been design according to ASME VIII, but it won't come with 'U' Stamp inspection & Certificate unless is requested. There will be extra charges for the Stamping. Am I right?
Thanks n Regards,
Kim
On Sat, Jan 31, 2009 at 1:10 PM, Somesh Kumar Pandey <Somesh.Kumar@kbr.com> wrote:
Kim,
You can refer ASME Sec. VIII Div. 1 Cl. UG-115 through UG-120 for U
Stamp marking and report/ certificate requirement. For Pressure Relief
device you can get the requirements per Cl. UG-125 through UG-137 of
ASME Sec. VIII Div.1.
Regards
Somesh
-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Kim
Sent: January 30, 2009 5:33 PM
To: Materials & Welding
Cc: shihyuen81@yahoo.com
Subject: [MW:1482] ASME VIII
Dear Sirs,
I am looking for the information about ASME VIII for the pressure
vassel, pulsation dampener & Pressure relief valve. Is ASME VIII have
any relation with 'U' Stamp? Does ASME VIII provide any coding /
certificate?
Thank's in advance.
Best Regards,
Kim
This e-mail, including any attached files, may contain confidential and privileged information for the sole use of the intended recipient. Any review, use, distribution, or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive information for the intended recipient), please contact the sender by reply e-mail and delete all copies of this message.
<br
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
No comments:
Post a Comment