[MW:1283] RE: 1281] Impact testing values

If the design is based on the parent metal strength, then yes the weld
metal should be equal to the base meteral.

-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of
Sudipto_Banerjee@fwuk.fwc.com
Sent: Monday, November 10, 2008 8:37 AM
To: materials-welding@googlegroups.com
Subject: [MW:1281] Impact testing values

Can anyone tell me whether the impact test value will be same for the
parent metal and the weld metal? or it can be different.

Best Regards,
Sudipto Banerjee
Man. no. B 4974
Equipment Engg. Department
Office no. 0044- (0)118 913 2295

=======================================================
Confidentiality Notice

This communication and the information it contains:-
(a) Is intended for the person(s) or organisation(s) named above and for
no other person(s) or organisation(s).
(b) May be confidential, legally privileged and protected in law.
Unauthorised use, copying or disclosure of any of it may be unlawful. If
you have received this communication in error, please contact us
immediately by email at Postmaster@fwuk.fwc.com.
=======================================================

**************************************************************
The contents of this e-mail message and any attachments are confidential and are intended solely for the addressee. If you have received this transmission in error, please immediately notify the sender by return e-mail and delete this message and its attachments. Any unauthorized use, copying or dissemination of this transmission is prohibited. Neither the confidentiality nor the integrity of this message can be vouched for following transmission on the Internet.
**************************************************************

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---