[MW:1269] Consumables for welding SA537 cl1

PK
pl. include appropriate subject line when posting a new querry!

is this contractual requirement, Ni>3%?, what is the service involved?
and what is MDMT (i mean minimum not maximum)?

________________________________

From: kataiah@bilfal.com [mailto:kataiah@bilfal.com]
Sent: Wed 05/11/2008 15:58
To:
Subject:

Shell, SA 537 Cl1 (50 mmThk)
Dished end,SA 537 Cl1
SR Nozzle,SA 350 LF2 2inch to 24 inches (Carbon0.3%;Nickle 3.3 to 3.7 %)

VESSEL IS according to ASME SEC VIII-DIV2-EDN 2007

Max design metal metal temp ; -40degree temperature.

Hydro test pressure: 133.5barg

Impacttest for materials: shell/head materials to be impact tested at -60degree centigrade.

Materials for forgings exempeted asper 3.11.2.

Pwht; yes

ASME U2 STAMPED VESSEL

Inform Specification of Electrode to be used.

Regards

P.Kataiah

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---