[MW:1277] RE: 1271] Pipes ASTM B165 UNS No 4400

if you refer table X2.1 sizes up to 8" in SMLS are regularly available. for above 8" its quite common to get welded pipe, I don't know, you may check with other vendors if SMLS in 12" is available.

-----Original Message-----
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com]On Behalf Of Bagesh Kumar
Sent: Thursday, November 06, 2008 4:48 AM
To: materials-welding@googlegroups.com
Subject: [MW:1271] Pipes ASTM B165 UNS No 4400

Dear All,

                 I have got the requirement of subjected material of 12" Size Sch 10S seamless annealed from Licensor side, I sent enquiries to many vendors out of which one has replied in this manner,

Following the enquiry for this project, you are requesting the following item:

- pipe B165 SMLS BE Annealed SCH10S ASTM B165-NO44000 12"

Actually, this product does not exist as seamless due to the thin thickness of the metal.

We requested alternate of: pipe B725 WELDED Annealed SCH10S  12", And request to accept the deviation,

Although I have kept hold on this matter, I would like to get some other quotes and deviation request also before my proceeding. Meanwhile  would like some views to be thrown on that, as I am not been satisfied by the vendor's condition for the said deviation request, As I do not want to change the material just because of its thinness, and aslo it is of licensor's requirement.

Thanks & Regards.

Bagesh

 

 

 

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---